Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - jjobson98

Pages: [1]
1
Substance PainterSubstance Painter - Baking - Not baking straight lines?
 on: August 01, 2020, 12:04:42 pm 
Hi, I'm trying to create a unit that has straight indents around the door, but for some reason it's not baking them as straight lines. Below are screenshots of the low and high model, as well as the uv map for the low model.

How it comes out:


UV Map and low poly model:


High Poly:


The checkered pattern is shown as straight so there's no reason for it to not all be lined up?

2
Hi,

I've made a vent, a low and high poly, and I bake the high poly onto the low poly and it comes out fine, how I want it too, then I put the materials into 3DS Max (Arnold) and I don't see the high poly bake onto it anywhere? It's not on the actual png of the maps either. I've tried using Arnold properties for displacement to use the heightmap but that doesn't make a difference either.






3
SubstanceSubstance - Discussions - New PC?
 on: November 12, 2017, 05:22:20 pm 
Hi,

So I might be buying a new custom built PC soon, but I'm not overly sure on what's best for what I want to use it for. So I will be using this PC for mainly Autodesk applications such as Maya and Allegorithmic programs such as Substance Painter/Designer. Is there anything you guys would recommend changing/adding?

Here are the specs:

Case
COOLERMASTER MASTERBOX 5t GAMING CASE
Processor (CPU)
Intel® Core™i7 Quad Core Processor i7-7700 (3.6GHz) 8MB Cache
Motherboard
ASUS® STRIX B250H GAMING: ATX, LGA1151, USB 3.0, SATA 6GBs
Memory (RAM)
16GB Corsair VENGEANCE DDR4 2133MHz (2 x 8GB)
Graphics Card
6GB NVIDIA GEFORCE GTX 1060 - DVI, HDMI, 3 x DP - GeForce GTX VR Ready!
1st Hard Disk
1TB SATA-III 3.5" HDD, 6GB/s, 7200RPM, 32MB CACHE
DVD/BLU-RAY Drive
NOT REQUIRED
Power Supply
CORSAIR 450W VS SERIES™ VS-450 POWER SUPPLY
Power Cable
1 x 1 Metre UK Power Cable (Kettle Lead)
Processor Cooling
PCS FrostFlow 100 Series High Performance CPU Cooler
Thermal Paste
STANDARD THERMAL PASTE FOR SUFFICIENT COOLING
Sound Card
ONBOARD 6 CHANNEL (5.1) HIGH DEF AUDIO (AS STANDARD)
Wireless/Wired Networking
WIRELESS 802.11 AC1200 867Mbps/5GHz, 300Mbps/2.4GHz PCI-E CARD
USB Options
MIN. 2 x USB 3.0 & 2 x USB 2.0 PORTS @ BACK PANEL + MIN. 2 FRONT PORTS
Operating System
Genuine Windows 10 Home 64 Bit - inc DVD & Single Licence

4
So I own a desktop computer and had been using Substance Painter on it for a while, then all of a sudden I started getting this error pop up:

https://imgur.com/OaB2ZtZ

So I googled the error and sure enough a lot of others had the same problem, so I followed the steps to fix it. The first step was to go to NVIDIA control panel and go under the "Desktop" tab and check the box that allows the right click on the program to choose what hardware to run it on, but for me the option just isn't there.

Then the next was to go to the 3D settings and change the preferred processes to use, but I also don't have this option, these are the options I can change below:

https://imgur.com/N6pvcqP
https://imgur.com/HSCWoI5

I'm not sure what else to try, my graphics card driver is updated and my substance painter is all updated.

Any help would be much appreciated.

Pages: [1]