Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - decorix

Pages: [1]
1
Substance PainterSubstance Painter - Discussions - Substance painter using the materials/smart to export out texture?
 on: June 28, 2021, 08:56:50 am 
Hi, does anybody know how you would create texture from a material like e.g.  (soft concrete in SP) in substance painter albedo/roughness/normal/ao.
 
Now I'm creating a plane and then assign the material to the plane.. Then I export this out in SP. It does work, but isn't there an easier way?

I also looked into substance player I could load in the sbsar file.  What the best way? to get out the tilling texture in SP.
Or do you need Alchemist for this? Thanks so much for the info.

2
Substance PainterSubstance Painter - Discussions - Doing Design paterns on shirt and more complex designs (workflow question)
 on: May 26, 2021, 11:43:55 am 
Hello all,

I have question regarding doing designs on shirts. I have seen some stuff
like using stencils with alpha and color base. (like logo print on shirt)

What about doing more complex stuff like strips or certain complex paterns/gradients.

How do you approach this? do you use brush tools with perhaps procedural alphas/tilling
 and masking things? stacking up you're layers. Guess doing this on the 2d view would work best. Ofcourse setting up you're uvs correctly will help for painting.

If anybody has any good tips that would be great.

Thanks in advanced.

decor








3
Substance Integrations - UE4 - SubstanceSource export material to seperate folder (UNREAL)
 on: April 22, 2021, 08:50:47 am 
Hello,

I have a question. When I'm in SubstanceSource and select a material for export to Unreal it exports the material (example Metal) into a folder, when I export second material example (wood) it also exports it to the same folder. Is this correct? Or can you export to seperate folders? Is that possible? So each material into seperate folder. Thanks in advanced.
Decorix
 

4
Substance PainterSubstance Painter - Baking - baking issue with HP mesh
 on: September 10, 2020, 03:37:24 pm 
Hi,

I'm wondering how many polygons you can bring into SP is that limited to you're system setup?


I'm asking my self now how far can I take this model / bake with my
current mid range pc. Perhaps 8 million poly in SP is working, but more 10 millions will hardcrash SP.

Thanks

My specs:

12 gig ram
p7
win 10
GTX 1050ti

5
Substance PainterSubstance Painter - Baking - baking Low & high mesh parts
 on: July 19, 2020, 03:33:50 pm 
Hi all,

I have seen this tutorial recently were more FBX files are loaded into the high defination meshes. I always thought
that you loaded in one FBX file with all the HP mesh parts. That's how i have been doing it. Is this correct ? I'm using the
Match by name.

This same thing you would o for the LP meshes also use one fbx file with all the seleted parts you export from you're
3d package. Thanks in advanced.






6
Substance PainterSubstance Painter - Baking - Mirror UV (baking)
 on: October 18, 2019, 10:02:32 am 
hello All,

I'be been testing and playing arround with Mirrored uv's few days. I have got it working kindoff ;-)
but for some reason I'm getting bad baking artifacts/strechting on some parts of my mesh.
see attached image. Also when I don't flip my uv shells it bakes out fine, but then my text (CLEAR)
is mirrored in correctly so that's not a option. What could be causing this?
Thank you.

7
Substance Integrations - UE4 - Substance live link to UE4.23 (problem)
 on: October 08, 2019, 09:45:51 am 
Sorry, guys (got it working now)

Hello,

I've installed the latest Substance plugin to UE. 4.23.0.1, but when I export my mesh from content browser its not
showing in Painter 2019.2.2 Also the UE icon is not present in SP.

I tried this (old post) but also nothing happening. Thanks you.

OLD
Quote from: shadowt56 on December 03, 2017, 03:33:58 pm
[Script] file:///C:/Users/Admin/Documents/Allegorithmic/Substance Painter/plugins/dcc-live-link/main.qml:274: TypeError: Cannot read property 'materials' of undefined

any ideas?

Have you tried the workaround? (This is if you don't have the source fbx)

1. Right click on the asset in the content browser and go to Asset Actions - Export.
2. Make sure Collision is turned off under the Static Mesh section on the Export dialogue. (can leave LOD on or off)
3. Export the fbx somewhere.
4. Right click on the asset in the content browser again and click Reimport.
5. Choose the mesh that you just exported.
6. Send to Painter should now work.

This process will be automated in the future, but this is the current workaround at the moment.


 

8
Substance PainterSubstance Painter - Discussions - Rivits placements (using Generators)
 on: October 06, 2019, 09:57:31 am 
Hello all,

I'm currrently working on a hardsurface piece and I need
to place rivits in tilling / square format.

I tried the Tile Generator, but I can't get the rivits close to
each other there isn't option for that. Even when i lower the scale
the gap is to large. Other parameters are included like offset.

Also the circle generator has not many parameters not even scale paramter.

Any advice or tips. Many thanks

 

9
Substance PainterSubstance Painter - Discussions - work arround when using Normal/Heightmaps
 on: October 01, 2019, 09:35:36 am 
Hi,

I've seen a old tutorial explaning a work arround when using hardsurface normal stamps that ship
with SP when using eg.. MetalEdge wear generator. You bake out the normal maps and then re-import them
back into SP. Is this work arround still prefered? or is it better to use the new Anchorpoint. I'm just wondering :-)
Thanks in advanced (Sp.2019.2.2)

10
Substance Alchemist - Discussions - Alchemist and B2M
 on: September 03, 2019, 02:33:15 pm 
Hello all,

I'm wondering what the difference between Alchemist and B2M if you wanted to create realworld textures
using a imported texture?. Any info on this?


11
Substance Alchemist - Discussions - AO output
 on: June 02, 2019, 02:31:33 pm 
Hello,

I have just started with Alchemist and...

I'm using the cremic tiles material from substance source, but when I output (export) the textures there's isnt
AO output.  How do you add this? many thanks.

12
Substance B2M & Substance Player - Substance Player - MergeTextureSetList (problem)
 on: January 31, 2019, 10:20:21 am 
Hi all,

I've been looking into MergeTextureSetList and found a tool that works with the Substance.player I have
downloaded latest version. I have imported correct textures into slots as shown, but when I export out it goes
wrong. Can anybody help? Is this bug? Thank you all.


13
SubstanceSubstance - Purchases & Licenses - IndieLicence & Source/Monthly subscribtion.
 on: January 11, 2019, 09:19:58 pm 
Hello,

I have short question. I have IndieLicence of SP. But this doesn't include SubstanceSource. Can I subscribe to the
Montly plan that includes  SD,SubstanceSource+more and also cancel it at anytime, if needed? Hope to hear from you all.
Thank you.

14
Substance PainterSubstance Painter - Discussions - Packing textures with SP possible?
 on: January 08, 2019, 04:04:52 pm 
Hi have short question I'm new to SP.

i want to do the following. I have some materials from substance source. I then used Substance player for exporting
out the textures (works great), but now I would like to pack some textures. Can this be done SP? if so how? Sofar I can only do it with substance designer importing the texures and using rgb merge node. Thank you in advanced.
decorix


15
Substance PainterSubstance Painter - Discussions - unable to load scene from url
 on: September 01, 2016, 01:01:27 pm 
Hi All,

I have my fbx exported out of zbrush its has 3 subtools and I'm using polygroups
for baking my ID map. The problem is when I have a HP_mesh that has more then 2 million polys

then I get the same error as this post..
https://forum.allegorithmic.com/index.php?topic=4934.0

If my HP mesh under the 2million then it will bake fine. What could be causing this?

Many thanks.






Pages: [1]