Author Topic: Cant use an emmisive chanel with a fill layer  (Read 395 times)

It normally does not allow me to paint by using a separate fill layer with an Emmisve chanel but it had allowed me to do it in my last project before it randomly stopped working again.

Are you saying that you cannot paint in your MASK which is attached the to FILL LAYER you're using for the EMISSIVE?

I've never experienced this issue before, can you either provide a .spp or duplicate the issue in another project and upload that to a file sharing site?
I teach people how to use Substance Painter. :)


It works fine, you just have the value on your brush to black and it needs to be white for the mask.

See below:



I teach people how to use Substance Painter. :)

ok then. I guess It was always like that as a default? Or I just touched it without knowing. Ty for your help

I have no way to know what you did. It will default to 1.

Make a new project, add a Fill Layer, add a Black Mask and check, it should be set to 1. You most likely changed it to 0. If you make a White Mask it defaults to 0 instead of 1.
I teach people how to use Substance Painter. :)