Issue with baking a simple Low / High

[alecpole3d]

Hey guys,

I bake often with substance Painter, but with really simple mesh, I've an issue... the bake is totally wrong...


the HP has nothing particular.....




Usually, this issue is the wrong Groupsmooth but here, 1 UVISLAND = 1 Groupsmooth
I tried with a unique groupsmooth, same result...

No overlapped uv, no invertex poly, all is reset X formed...


I'm out of idea.... and you ? :disappointed:

Thanks, and have a nice week

[CAGameDEV]

Your problem is because your low poly mesh has edges without proper support. You cannot expect a 90 degree edge to take on the shape of a beveled edge from the high poly for example. Add in edge support, then use smoothing groups.

[alecpole3d]

hum, can you draw on the screeen, where do you think the edge support is needed ?

[Quân Thái 1]

Hey guys,

I bake often with substance Painter, but with really simple mesh, I've an issue... the bake is totally wrong...


the HP has nothing particular.....




Usually, this issue is the wrong Groupsmooth but here, 1 UVISLAND = 1 Groupsmooth
I tried with a unique groupsmooth, same result...

No overlapped uv, no invertex poly, all is reset X formed...


I'm out of idea.... and you ? :disappointed:

Thanks, and have a nice week

Please soften the edge at low poly, or you can refer to the following video:
https://www.youtube.com/watch?v=rhVQ66UHeTY
Hope it will be helpful to you